Grinder

The pulverizer is a new type of pulverizing equipment newly developed with advanced technology at home and abroad. It combines the pulverizing principles of various traditional pulverizers at home and abroad to innovate. It has been successfully developed from a traditional pulverizer with a variety of pulverizing principles at home and abroad into an effective energy-saving pulverizer integrating three kinds of pulverizing principles. This machine is equipped with a fineness analyzer and is specialized in circuit board materials, positive and negative electrode materials Lithium battery materials and other special difficult crushing equipment. The feeding inlet of the machine adopts self-priming feeding to ensure safe production forever, replacing the shortcomings of direct feeding of traditional pulverizers, careless input of metal blocks and serious damage to the pulverizer. The machine is finely made and has high processing technology. It adopts a double-layer body and is filled with a new lining material, which has the function of sound insulation and heat dissipation. Therefore, the machine has low noise and no vibration in production and use.

1、 Introduction to pulverizer:

The pulverizer adopts blade type crushing equipment, which has high crushing efficiency, low resistance and low relative power consumption, and is suitable for crushing soft and ductile materials. At the same time, the pulverizer is equipped with a wind separation system for crushing products, and the rear end of the pulverizer is equipped with a wind transmission function. The materials that meet the crushing requirements during the crushing process are transferred to the next section under the wind force of the fan, and the whole production process has low noise and low energy consumption, The dust generated in the crushing process is sent to the material collection facilities and dust collection facilities through the closed negative pressure system. The crushing equipment meets the requirements of cleaner production and consists of three parts: the body, the middle body and the lower body.

2、 Principle of pulverizer:

1. It is composed of three parts: body, middle body and lower body.

2. The grinding tool is wear-resistant and consists of blade, screen an lining plate.

3. It consists of auxiliary fan, fan, dust collector and dust collector.

4. The main machine crushing chamber adopts centrifugal knife, which has coarse crushing, fine crushing and centrifugal repeated crushing. The motor drives the rotor to run at high speed, which makes the machine produce high speed air flow to produce high strength impact force, compression force, cutting force and friction force on the crushed materials, so as to achieve the unique crushing function.

5. In the process of centrifugal rotary pulverization, the rotor produces a high speed air flow that rotates with the direction of the blade. The material accelerates in the air flow and repeatedly impacts, cuts and rubs. At the same time, it is subject to three kinds of pulverization actions. The crushed material enters the analyzer with the air flow for analysis. Because it is subject to the centripetal force of the air flow when it is subjected to the centrifugal force of the analyzer rotor, when it is subjected to the centripetal force of the air flow, the fine particles enter the powder collector with the air flow for collection, The coarse particles will enter the centrifugal crushing chamber and continue to be crushed until they reach your desired fineness.

Strive for a new situation！ Less nonsense and more practical work! No amount of rhetoric and packaging planning can compare with doing something on the product! Xingmao precipitate the brand value of [Grinder] with accumulated little actions! It is fate to know each other, and cooperation is a share.

---

After receiving service requests, Xingmao will respond through telephone or email support within the response time stipulated by service level to help customers analyze, diagnose and locate problems, provide solutions to problems, and guide customers to implement them. To enable customers to enjoy more convenient and comprehensive consultant-type expert services.

Xingmao respect privacy! Your personal information is only used for our communication on Grinder product cooperation!

Headquarters

HENAN, CHINA
The intersection of 237 Provincial Road and Chuangye Avenue at Beishankou, Gongyi City, Henan Province is 80 meters north and east
Phone: +86 15238675155
Whatsapp: {whatsapp}